How to correctly set up the NObreath FeNO Monitor
NOTE: Before first use, the NObreath® should be charged for 24 hours.
- To charge the NObreath®, first make sure the micro-USB cable provided is connected to the NObreath Dock and connect the other end of the micro-USB cable to the pre-approved mains adapter supplied, using the appropriate universal adapter.
- Plug the pre-approved mains plug into the mains power. When receiving power, the LED on the Dock will light up green and the NObreath® can be placed in the Dock to charge. The screen will indicate that the monitor is charging.
- Alternatively, the NObreath® FeNO monitor can be charged by plugging the micro-USB cable provided directly into the NObreath®. This can then be connected either to the pre-approved mains adapter or into a computer USB port.
- Once the device is fully charged, press the power button to turn the device on.
The default PIN on the NObreath® is ‘0000’; it is strongly recommended to change this prior to first use.
If the problem persists or has not been resolved by the information provided above, please contact Bedfont or your local distributor for more advice.