How to charge the NObreath
The NObreath FeNO monitor comes with a Dock and charging cable to keep the monitor at hand and fully charged. To charge the NObreath, first make sure the micro-USB cable provided is connected to the NObreath Dock. Connect the other end of the micro-USB cable to the pre-approved mains adapter supplied, using the appropriate universal adapter. Plug the pre-approved mains plug into the mains power. When receiving power, the LED on the NObreath Dock will light up green and the NObreath can be placed in the Dock to charge. The screen will indicate that the monitor is charging.
Alternatively, the NObreath FeNO monitor can be charged by plugging the micro-USB cable provided directly into the NObreath. This can then be connected either to the pre-approved mains adapter or into a computer USB port.
Please note: When charging the NObreath for the first time, ensure you charge fully for 24 hours before use.
View the below video for more information on how to charge the NObreath.
If the problem persists or has not been resolved by the information provided above, please contact Bedfont or your local distributor for more advice.